Which one of the following operation is done by same tool? Mark as favorite Copy Link reaming and taping facing and drilling counter boring and spot facing none of the above Check Answer
Select the spindle speed (rpm) for HSS drill diameter +24 mm and cutting speed (v) 30m/min to drill mild steel? Mark as favorite Copy Link 300 rpm 400 rpm 500 rpm 600 rpm Check Answer
What is the speed of drill in RPM, to drill 14 mm hole when the cutting speed is 33 m/min? Mark as favorite Copy Link 850 700 750 800 Check Answer
An operation performed for enlarging an existing jole up to only a limited length from its one end? Mark as favorite Copy Link counter sinking counter boring spot facing boring Check Answer
Rough & finish boring operations are carried out to machine a hole in a milling machine, for rough boring, select ______________? Mark as favorite Copy Link High spindle speed & coarse feed Slow spindle speed & coarse feed Slow spindle speed & fine feed High spindle speed & fine feed Check Answer
The cutting tool in a milling machine is mounted on ______________? Mark as favorite Copy Link Arbor Column Spindle Knee Check Answer
Calculate rpm to drill a hole of 10mm diameter with cutting speed of 33m/min? Mark as favorite Copy Link 300 330 1000 1050 Check Answer
Select the spindle speed (rpm) for HSS drill diameter +24 mm and cutting speed (v) 30m/min to drill mild steel? Mark as favorite Copy Link 300 rpm 400 rpm 500 rpm 600 rpm Check Answer
An ideal machining allowance for finishing boring will be _____? Mark as favorite Copy Link 1 mm to 2 mm 0.5 mm to 1 mm 0.25 mm to 0.50 mm 0.10 mm to 0.25 mm Check Answer
Trimming is the process associated with? Mark as favorite Copy Link forging press work machining electroplating Check Answer