The minimum thickness of a wall in stone masonry should not be less than? Mark as favorite Copy Link 100 mm 200 mm 350 mm 450 mm Check Answer
The projecting part of the tread beyond the face of riser is called? Mark as favorite Copy Link pitch nosing baluster stringer Check Answer
When the pile is driven by means of water jets, water is forced through the jet pipe under a pressure of? Mark as favorite Copy Link 0.2 to 0.5 N/mm² 0.5 to 0.7 N/mm² 0.7 to 1.75 N/mm² 1.75 to 2.5 N/mm² Check Answer
In a flat arch, the skew back is made to rest in an inclined position so as to make an angle …………. with the springing line? Mark as favorite Copy Link 30° 40° 50° 60° Check Answer
The coupled roof is suitable for spans upto? Mark as favorite Copy Link 3.5 m 5 m 6.5 m 8 m Check Answer
Hearting is the portion of a? Mark as favorite Copy Link wall not exposed to weather brick cut across the width wall between facing and backing brick cut in such a manner that its one long face remains uncut Check Answer
A foundation consisting of thick reinforced concrete slab covering the entire area of the bottom called of the structure, is known as? Mark as favorite Copy Link pile foundation pier foundation raft foundation machine foundation Check Answer
The pointing which is extensively used in brick work and stone masonry face work, is? Mark as favorite Copy Link flush pointing struck pointing V-grooved pointing tuck pointing Check Answer
The minimum load which will cause failure of a foundation is called ……… of the soil? Mark as favorite Copy Link ultimate tensile strength nominal strength ultimate bearing power ultimate compressive strength Check Answer